Home Page | Owners Registry | Discussion Forums | ProwlerMall | Event Scrapbooks | About |
| |||||
Want to register? |
If you have previously registered, but forgotten your password, click here.
This message has been edited by ALLEY CAT on 05-06-2022 at 12:24 PM This message has been edited by DublinOH on 05-06-2022 at 12:04 PM That's funny! I once ordered that part w/o asking the price. When it arrived, I went to Parts to pick-up. They wanted $32 for a piece of plastic the size of a nickel with a hole in it. I told the guys to send it back to the LA depot and tell 'em it was a mistake order. No way,,,then I decided to use silicone to re-attach to the dash.SPRINGER75 looking for a headlamp switch bezel, part# pf81laz alrtg Suggestion.
Glue the one you have in place or use double sided tape.
In over a dozen years, I have not seen any advertised anywhere.SPRINGER75 yes good idea, i'm on it! lol. thank you! ALLEY CAT A small dab of silicone adhesive on the back side should hold it... DublinOH Just an FYI....I bought the last NOS bezel from Chrysler's inventory about 3 years ago. Still have it in my parts collection. At that time it was just under $60. A little dab of clear silicone will do ya or you can go out and purchase a jar of petroleum jelly and give me a call. dru quote:
Originally posted by DublinOH:
...or you can go out and purchase a jar of petroleum jelly and give me a call. ALLEY CAT quote: " At that time it was just under $60
.
All material contained herein, Copyright 2000 - 2020